Catchpit Chamber Set - 450mm Diameter x 2410mm Height For 110mm & 160mm Pipe with 110mm & 160mm Inlets
In stock
Only %1 left
Code
AICCP450B/2.4
This catchpit chamber has a diameter of 450mm and is 2410mm deep. It features a main channel of 110mm or 160mm and an additional two 110mm or 160mm inlets at 90 degrees.
Our catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.
Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.
NOTE: This product is not supplied with a lid, which must be purchased separately.
KEY FEATURES & BENEFITS OF THIS PRODUCT
- Quick and simple installation
- Arrives factory assembled in one piece
- Design life of 60 years
- Lightweight and requires no specialist equipment to lift
- Compatible with most pipe systems
- Granular backfill
- Complies with EN 13598-2 (2009), SfA7 and Building Regulations Part H1
- 4x 110mm/160mm inlets
To view Turtle's installation guide for inspection chambers, click here.
