FloPlast Industrial/ Xtraflo Gutter Fascia Bracket - 170mm White

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.

The bracket is screwed to the fascia board using two countersunk screws (we recommend 5 x 30mm). The industrial gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.

Due to the potentially heavy weight of rain or snow carried in this gutter the brackets should be spaced at no more than 600mm centres - that means that you should allow 7 brackets for each 4m length.