32mm Waste should be used on washbasins, vanity basins and standard urinals.
40mm Waste should be used on Baths, Showers, Kitchen Sinks, Washing Machines & Dishwashers. Some commercial urinals also use 40mm waste.
50mm Waste should be used for a collection of pipe runs or for commercial applications where flows are larger.
Simply ensure that the pipe is cut squarely with no sharp edges or burrs, and push it into the fitting. You should always ensure that a 10mm gap is left between pipes in a push fit joint for expansion purposes. If you are using pipe clips they should be spaced 1.2m apart vertically and 500mm apart horizontally.
We would not recommend mixing and matching Push Fit systems from different manufacturers. If you need to connect to another system we would always recommend the use of our multi-fit compression system, which has greater tolerance to allow connection to different types of plastic and to most metals. Push Fit waste pipes or fittings are not compatible with our ABS Solvent Weld System, which requires the use of solvent cement to make the joints.
Our polypropylene waste is manufactured to BS EN 1455-1:2000 / BS 5255 by the leading UK Above and Below Ground Drainage & Guttering Manufacturer FloPlast. Our Waste Pipes are all compatible with our Soil and Vent & Drainage Systems.